CC2544: About the Auto-Acknowledgement

Mike Wu1

Expert 2391 points

Part Number: CC2544
Other Parts Discussed in Thread: CC2543, CC2545

Hi,

The datasheet of CC2544 mention "Extensive Baseband Automation, Including Auto-Acknowledgement and Address decoding."

My customer want to know more about the "Auto-Acknowledgement ".

Is it means Auto-Acknowledgement for I2C bus , not Proprietary 2.4GHz communication ?

Mike

over 5 years ago

0 Fredrik K over 5 years ago

TI__Guru** 106705 points

Hi Mike,

Auto-ack is for the RF communication. You will find more details in the CC2543/CC2544/CC2545 User´s Guide.

Regards,
Fredrik

0 Mike Wu1 over 5 years ago in reply to Fredrik K

Expert 2391 points

Hi Fredrik,

Thanks for your feedback and the feedback is passed on to my customer.

Please help to advice if there exist TI Software Examples of CC2543/CC2544 which can help my customer to develop a frequency-jump mechanism for building a robust Proprietary 2.4GHz communication.

Thanks.

Mike

0 Fredrik K over 5 years ago in reply to Mike Wu1

TI__Guru** 106705 points

Hi Mike,

For the CC2544 we only have a simple RF example, the PER test.

If they need a more robust solution, they must either develop it themselves, or select another device which is supported by a defined protocol.

Regards,
Fredrik

Other wireless

Other wireless technologies forum

CC2544: About the Auto-Acknowledgement