• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 17 subscribers
  • Views 333 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDC-WL1835MODCOM8B: TIDC-WL1835MODCOM8B + TMDXEVM3358 (RF Testing using Spectrum Analyzer)

Dimas Andy Kurniawan
Intellectual 300 points
Part Number: TIDC-WL1835MODCOM8B

Dear TI Experts,

I has posted many question in some forums as below,

  1. https://e2e.ti.com/support/wireless-connectivity/wifi/f/968/t/789662
  2. https://e2e.ti.com/support/wireless-connectivity/other-wireless/f/667/t/764193
  3. https://e2e.ti.com/support/wireless-connectivity/other-wireless/f/667/t/759673
  4. https://e2e.ti.com/support/rf-microwave/f/220/t/745607

And i still cannot run WL18xx Testing based on this site http://processors.wiki.ti.com/index.php/WL18xx_TX_Testing. So, could you please give us assistance to run that testing in our computer directly? Please let me know how we can get remote access from your engineer by using TeamViewer, etc...? 

Awaiting your response.

Best Regards,

Dimas 

  • 0
    TI__Mastermind 35795 points

    Hi Dimas, 

    Calibrator RF test commands should work . We have lot of customers running these commands on their platforms. We have posted our suggestions in the previous posts mentioned above.We suggest that you can get one of TI EVMs and use it as reference to debug this issue. 

    Thanks

    Saurabh