• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 16 subscribers
  • Views 197 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Compiler/MRD2EVM: need c language and c# code

Cickey Xu
Intellectual 656 points
Part Number: MRD2EVM
Other Parts Discussed in Thread: RI-STU-MRD2

Tool/software: TI C/C++ Compiler

Dear TI team,

my customer is using MRD2EVM to develop RFID product, they had purchased the EVM, need C language code and c# code to begin secondary development. can you help share the code or refer project course?

thanks.

Cickey Xu

  • 0
    TI__Mastermind 18265 points

    Hello Cickey,

    the RI-STU-MRD2 is a RFID reader with a USB port which acts as virtual serial port. To control the reader commands have to be send to the serial port. The commands are explained in detail in the documentation. We provide also a GUI to show the MRD2 functionality. Source in any form is not available.

    For me it is not clear what functionality the customer expects from the source code. Can he explain what support he would expect from this source code.

    On request I can provide a tool (no source code) which can be used to evaluate all possible commands of the MRD2, but this is not an official supported tool.

    Best regards,

    Helfried