This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: CC2650
I am working on Constrained Application Protocol. so i enable my sensor tag cc2650stk to 6lowpan by building a program on contiki examples cc2650-web-demo .
To receive the packets i have configure my dongle cc2531 to slip radio.
After that i have configure my rasberri pi to 6lbr by following .
After that i connected my dongle with rasberri pi and turn on all devices . When i start 6lbr service. I can access the web server in my laptop by connecting with ethernet cable.
When i click the sensors tab i does not showing my senosr tags values
What I am thinking is that there is a problem in the interfacing of dongle and sensor tags.
Kindly help me to fix the problem.
In reply to YiKai Chen:
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Usman Muhammad:
If my post answers your question, please click on "This Resolved my issue" button to benefit others who have the same issue.
How to check APS ack in TI Z-Stack
How to detect button hold in CC26x2, CC13x0, CC13x2 SDK.
660 Zigbee devices in the same Zigbee network!
How to setup Mosquitto on Raspberry Pi and make Contiki/Contiki-NG cc26xx-web-demo do mqtt publish to it.
How to connect Contiki-NG cc26xx-web-demo to IBM Watson IoT Platform
How to build and run Contiki-NG cc26xx-web-demo running on LAUNCHXL-CC1310 and rpl-border-router on Raspberry Pi with slip radio running on LAUNCHXL-CC131
I also did git checkout ff69ae4214407eeec4c71f87589ac4bc7d3a8a49
after that i again start 6lbr by running "sudo service 6lbr start" but does not showing sensor values
i even tried different git checkout from following
but still web server is working fine but sensor values are not dispalying
I noticed that the suggested answer did not help you reach a resolution. Please provide why this was not the case as well as any other information that may help us resolve this.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.