This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

Design for CC1101 and CC1070 for 403 MHz?

Prodigy 105 points

Replies: 13

Views: 2760

I have both CC1101 and CC1070, and I want a very low power, short range (less than 10 m) transceiver system.

1) If I use CC1101, where can I find reference design and layout for 403MHz (I can find only for 433 and 868)?

2) If I use CC1070, which IC can I use as receiver IC that is compatible with it for 402 MHz (also I want refe5rence design for it for 402MHz) ?

If I start with CC1101 for 433MHz, how can I optimize it for 403MHz (any help appreciated) .

Thanks

  • In reply to Bui Anh Kieu98922:

    Are you using the development kit/board or directly using the IC?

  • Prodigy 289540 points

    In reply to Mihir Gupta1:

    You could use Smart RF Studio like the following:

    - For testing where you connect your evaluation board with a EM attached to a PC with a USB cable and control the EM with Smart RF Studio

    - You use Smart RF Studio in offline mode (no EB/EM connected) to find the correct settings for your use case. The you can export the register settings to use in your code.

     

  • In reply to Mihir Gupta1:

    Hello Mihir,

    I'm not using Development Board,  I use PIC microcontroller interface with CC1101.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.