• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 602 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Re:cc2545 point to many network

manikanta kolisetty
Expert 1425 points
Other Parts Discussed in Thread: CC2545

Hi all,

I configure 3 cc2545 chips address as 0xEF in entry 0 in AUTO mode. In those I am using one chip as transmitter and remaining two as receivers.

How many devices I can configure with the same address in entry 0 and auto mode.

  • 0
    TI__Mastermind 36375 points
    manikanta,

    The auto mode of the CC2545 is only designed to work in point to point for a given address ( one TX and one RX node). I suggest having different address pairs for each point to point pair that you need to create. The auto mode included automatic retry and acknowledgement and they will collide if you do not have multiple addresses in your system.

    Regards,
    /TA