Re: LC filter at CC2545 RF_P and RF_N pins

manikanta kolisetty

Expert 1425 points

Other Parts Discussed in Thread: CC2545

Hi all,

Please verify the attached pic.

can I replace the balun IC (LFB182G45BG2D280) or not which is manufactured by Murata Electronics.

0 TA12012 over 8 years ago

Yes, please follow:

www.ti.com/.../swra380a.pdf

Regards,
/TA

0 manikanta kolisetty over 8 years ago in reply to TA12012

Expert 1425 points

Hi TA12012,

Thank you for your earlier reply,

one thing I forgot to tell you, If I designed a board with PCB trace Antenna (Inverted F antenna.) only and with out external Antenna connector.

In this case Can I place the balun IC in between the CC2545 Chip and Inverted F antenna?

Other wireless technologies forum