This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

CC-DEBUGGER: Mechanical Dimensions?

Prodigy 10 points

Replies: 2

Views: 168

Part Number: CC-DEBUGGER

I've been looking for a mechanical drawing, but have only seen layouts and schematics for the debugger.

Is there a mechanical drawing showing the dimensions of the debugger, or even better a step file?

  • Genius 12375 points
    Hello Daniel Doan,

    All schematics and layout can be found on the bottom of the product page : www.ti.com/.../CC-DEBUGGER

    Here is a direct link to the board files: www.ti.com/.../getliterature.tsp

    Regards,
    AB
  • Genius 12375 points
    Hello Daniel Doan,

    In order to open the gerber files located in folder from the link I provided (.pho extensions) you will need to open them with your editor. In my case I have Altium and these are the steps to follow:

    Open one new cam document file from file -new- cam document ,

    then go to file - import -Gerber in cam document.

    Regards,
    AB

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.