RF430FRL152HEVM: no battery device could get power from RF

user6371202

Part Number: RF430FRL152HEVM
Other Parts Discussed in Thread: RF430FRL152H

Dear Sir,

Is it possible to build a temperature sensing without battery. It gets power when NFC scan and work to send SD14 ADC temp value. If the answer yes, do I need to modify the circuit?

Thanks,

Sean

over 3 years ago

0 Helfried Vollbrecht over 3 years ago

TI__Mastermind 18265 points

Hello Sean,

yes, this is possible. Please see the following document:

https://www.ti.com/lit/an/sloa212a/sloa212a.pdf

This works also with RF430FRL152HEVM.

Also an App for Android Smartphones is available to read out the temperature:

https://e2e.ti.com/support/wireless-connectivity/other-wireless/f/667/t/602633

More information can be found in the RF430FRL152H FAQ:

http://www.ti.com/lit/an/sloa247c/sloa247c.pdf

Best regards,

Helfried

0 user6371202 over 3 years ago in reply to Helfried Vollbrecht

Prodigy 100 points

Thanks, Helfried. I have another question about the temperature sensing. The schematics shows ADC0, ADC1, ADC2 connected to light sensor. How do I calculate the temperature?

Thanks,

Sean

Other wireless

Other wireless technologies forum

RF430FRL152HEVM: no battery device could get power from RF