CC2544: How to update bin file to CC2544x using CCdebuger

jack chen2

Part Number: CC2544
Other Parts Discussed in Thread: CC2541, CC2540,

Hi All,

I want to update bin file to CC254x using CCdebuger.

After check with flash programmer and flash programmer console, it seems not support bin file to update all of the flash.

Please help to check if there is any way to update flash by bin file. Thanks!

BR,

Jack

over 6 years ago

0 JXS over 6 years ago

TI__Guru** 105180 points

Hello Jack,

Please refer to the command line utility SmartRFProgConsole.exe help menu for binary programming options. Note that binary programing is performed on a per-page basis.

Best wishes

0 jack chen2 over 6 years ago in reply to JXS

Expert 1240 points

Hello JXS,

Thanks for your reply.
So, binary programming can only perform on a page basis.
If I want to program the binary file to the flash, I should perform 32 command line for each page on CC254x right?
(Total 32 pages )

BR,
Jack

0 JXS over 6 years ago in reply to jack chen2

TI__Guru** 105180 points

Hello Jack,

Yes, however page size is 2kB for CC2540/CC2541 so this will be 64 or 128 operations depending on the flash size of the part. It's preferred to use hex files for programming though.

EDIT: I just realized that your inquiry is for CC2544 which has 32kB of flash memory and a 1kB flash page size. Sorry for the confusion. So yes, 32 operations are required.

Best wishes

Other wireless

Other wireless technologies forum

CC2544: How to update bin file to CC2544x using CCdebuger