Other Parts Discussed in Thread: LAUNCHXL-CC1352P,
Hey,
does the LAUNCHXL-CC26X2R1 require a resistor change when attaching an external antenna, similar to the LAUNCHXL-CC1352P?
Thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hey,
does the LAUNCHXL-CC26X2R1 require a resistor change when attaching an external antenna, similar to the LAUNCHXL-CC1352P?
Thanks
Boris,
As highlighted with a green box on the schematic (taken from the LaunchPad design files) below, you'll need to take the cap from C14 and solder on C24 to route the RF to P11.
BR,
Seong