This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WILINK8-WIFI-NLCP: Is anyway to identify WL1831 vs WL1833 by calibrator command??

Part Number: WILINK8-WIFI-NLCP

Hi,

Is there any way to  read a special register (using  calibrator + wl18xx_plt phy_reg_read <addr> ….) to identify the chip capabilities(ex WL1831 and WL1833) or if anything is mounted on the antennas that would enable identify one module vs the other ?

Austin

  • Hi, 

    I am not sure if there is a register that can be read to determine which module is being used. 

    WL1833 module supports A band. You can also check from the mounted antennas if the antenna supports 5GHz band. 

    Regards, 

    Sudharshan K N