LAUNCHXL-CC1350-4: 802.15.4g with FEC

If you need a FEC, you can use the CC1101 compatible FEC as described here: https://dev.ti.com/tirex/content/simplelink_cc13x0_sdk_4_10_01_01/docs/proprietary-rf/proprietary-rf-users-guide/proprietary-rf/cc1101-migration.html#forward-error-correction-fec

Hi TER,

So, the FEC in CC1101 is same as the FEC in 802.15.4g ,right?

tks.

No. SmartRF Studio does not support the 15.4 FEC. 

I looked at the latest CC1350 datasheet and could not find the snippet you have in your first post. Which page are you looking at? 

Hi TER,

page:1707

here:https://www.ti.com/lit/ug/swcu117i/swcu117i.pdf?ts=1621426872177

Can I use the 802.15.4g FEC of  LAUNCHXL-CC1350-4 in CCS?

As here:dev.ti.com/.../cc1101-migration.html

tks.

Hi TER,

It's means that I can't use the 802.15.4g FEC in LAUNCHXL-CC1350-4 , right?

tks.

Hi TER,

I want to check the packet of 802.15.4g SFD 0x6F4E(FEC on) .

But I can't ensure the FEC match 802.15.4g FEC.

So, I use LAUNCHXL-CC1350-4 because it supports 802.15.4g.

Thank you for this answer.

Hi TER,

It's very helpful to me.

tks.