LAUNCHXL-CC1310: Using BOOSTXL-Sensors with CC1310 and CC1352R1 Launchpads

Slev1n

Part Number: LAUNCHXL-CC1310
Other Parts Discussed in Thread: CC1310

Hello everybody,

I have a BOOSTXL-Sensor pack and a CC1310 and a CC1352R1 launchpad and I want to play around with the booster pack to see how the sensors can be read out and so on.

I was wondering if I can make use of the MSP432 or MSP430 software examples described in https://www.ti.com/lit/ug/slau666b/slau666b.pdf?ts=1630913640678&ref_url=https%253A%252F%252Fwww.google.com%252F

If not, can I use the drivers (listed in table 10 of the above link's pdf) like bme280.c etc?

What would you suggest to be a good starting point for the CC1310 and CC1352R1 launchpads? The "empty" example in the TI-Driver section?

Best wishes

Slev1n

over 2 years ago

+1 TER over 2 years ago

TI__Guru**** 317180 points

Start with the "empty" example from the SDK version you are using. Take a look at the APIs and examples in the "SimpleLink Sensor and Actuator Plugin" (https://dev.ti.com/tirex/explore/node?node=AFSrQICgvevFxy6Dv4Qy-Q__swcUKHN__LATEST) as a starting point for using the different sensors on the boosterpack.

0 Slev1n over 2 years ago in reply to TER

Genius 5680 points

Thanks for the advice. I will try it out.

Sub-1 GHz

Sub-1 GHz forum

LAUNCHXL-CC1310: Using BOOSTXL-Sensors with CC1310 and CC1352R1 Launchpads