Hello All,
I am currently working on a project for which a cc1101 has been chosen as our transceiver.
My understanding is that the best way to go about working with a CC1101 is to use SmartRF studio and an evaluation board to debug / configure the chip to our needs.
My question is: What is the currently suggested evalboard for doing so?
I have found this board through mouser and the TI website:
https://www.mouser.com/ProductDetail/Texas-Instruments/SMARTRFTRXEBK?qs=Y%252BBGkTaltXszeDQt%2FWPraQ%3D%3D&mgh=1&gclid=EAIaIQobChMIo5q-gJmK9gIVBRLnCh1gFQOKEAQYASABEgKdPfD_BwE
But see digikey listening the compatible daughter board (CC1101EMK433 - www.mouser.com/.../CC1101EMK433 as obsolete / not available - it is also listed by digikey as such.
So what is the suggested combination of Evalboard + cc1101 daughter board to develop for the cc1101?
Thank you
