This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-CC1312R7: CC1312R1 to CC1312R7 migration question

Part Number: LP-CC1312R7
Other Parts Discussed in Thread: CC1312R7, UNIFLASH, CC1312R


My customer needs to migrate CC1312R1 to CC1312R7.

I know the two devices have different memory sizes and I did a guide to the customer.

My customer is using contiki-ng and this doesn't support R7.

But I thought the difference between the two devices is the memory size, so I just changed the memory map and it would work.

I changed memory map in and cc13x2-cc26x2.icf files.

And then I make image file and program using the uniflash. but it doesn't work.

The EVMs of the two devices is different, but I have confirmed that the pin map in the schematics are the same.

So I used the source of the cc1312r launchpad without any changes.

Is there anything I need to change?