Hi,
For CC1200 which GND, AGND or DGND, should the GND pad be connected to?
Thanks,
Pawan
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
For CC1200 which GND, AGND or DGND, should the GND pad be connected to?
Thanks,
Pawan
Hi,
You have to click the image to enlarge it and then read the net names.
Thanks,
Pawan
When I first clicked on the picture it got smaller, not bigger, hence the question. But now I get an enlarged picture.
All the ground point on the picture should be the same. The same ground is used for all ground connections in the ref designs.
Hi,
Can you refer this case to someone like Siri or Guru and double check on the ground connections for this particular schematics?
Thanks,
Pawan
I'm not a TI employee meaning that I can't assign to anyone. Siri is a SW expert (not HW) and it's no user with the name of guru.
Please check the reference design, it's no upside, only downside to use use more than one ground connection in this case.
Hi Pawan,
To confirm: as above, the same GND is used for all ground connections in the reference designs.
Regards,
Zack