Other Parts Discussed in Thread: LP-CC2652RB, , CC2652RB
Hi,
I have been trying to test my custom board with MCU CC2652R7. I am using XDS110 debugger on a LP-CC2652RB development board. At first point I had some trouble with flashing the MCU. Then lowering TCLK frequency solved my problem and MCU can be flashed up to 4 MHz TCLK frequency. With the higher values than 4Mhz I cannot flash the MCU.
Now, I want to test RF feature on my custom board. SmartRF Studio can detect my MCU but it gives the attached error when I try to connect. I also tried to connect another launchpad with the same debugger and no problem with that.
I will be grateful if some can help.
Regards.