LAUNCHXL-CC1310: support for sample codes

CodeComposerProgrammer

Part Number: LAUNCHXL-CC1310
Other Parts Discussed in Thread: CC1310

Greetings,
i am running some sample code in my launchpad and everything works great.
Unfortunately, however, I need to work on the CC1310 RHB, in this the example codes do not work.
I am trying uartecho.
I would like some advice on how to adapt it, or if there is an example code for the RHB model.

Thank you.

over 1 year ago

0 CodeComposerProgrammer over 1 year ago

Prodigy 60 points

CC1310F128 -> RHB

0 Siri over 1 year ago in reply to CodeComposerProgrammer

TI__Guru* 79421 points

Unfortunately, we only have code examples for the 7x7 package.

Please see the following post:

(+) CCS/CC1310: CC1310 Examples for RHB Packages - Sub-1 GHz forum - Sub-1 GHz - TI E2E support forums

Siri

0 CodeComposerProgrammer over 1 year ago in reply to Siri

Prodigy 60 points

Hello, I read the problem you posted.
Unfortunately this doesn't help me solve the problem.
My launchpad is equipped with a CC1310F128 RGZ, instead I have to work on the CC1310F128 RHB.

The flash size should be the same, so I don't have to change anything, right?

What do you mean by "changing the board and linker files "?

dev.ti.com/.../index.html

this link unfortunately no longer works.

Can you give me information on what to change?

Thank you.

+1 Siri over 1 year ago in reply to CodeComposerProgrammer

TI__Guru* 79421 points

You should not have to change the linker files etc. since both devises have the same flash size etc.

You will need to go through the following files and make sure that they correspond to the HW you have made with the CC1310F128 RHB.

Board.h
CC13x0_LAUNCHXL.h
CC13x0_LAUNCHXL.c

+1 TheGhostOf over 1 year ago in reply to Siri

Genius 5610 points