• State
  • Locked Locked
  • Replies 8 replies
  • Subscribers 53 subscribers
  • Views 189 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CC2642R: power saving disable and enable does not work properly

LP-CC1352P7: cc1352P7

Manu pillai
Prodigy 175 points
Part Number: LP-CC1352P7
Other Parts Discussed in Thread: CC1352P

Hi 

We are working on a cattle health monitor system ,which uses Accelerometer and wireless communications(15.4 stack)..

1.The accelerometer ADXL 362(same as in the BoostXl pack) configured using the sensor controller studio(with the existing example)

The current consumption in the sensor section alone is 0.5mA which is too high for our application(integrated the same in an empty project without wireless and any other peripherals) 

Please suggest...