• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 54 subscribers
  • Views 110 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LP-CC1352P7: UIA and syscfg

LP-CC1352P7: TIRTOS 6/7 and execution graph

Mike Snyder
Intellectual 270 points
Part Number: LP-CC1352P7
Other Parts Discussed in Thread: SYSBIOS, SYSCONFIG

Hi! 

Does the Execution Graph work with any Syscfg enabled RTOS/SDK versions? 

Everything I'm seeing points to no 

In syscfg, under TI UTILS RUN-TIME -> EXECUTION GRAPH -> ExGr_SYSBIOS I get 

Unable to render selection

Error: No such resource: /ti/utils/runtime/ExecGraphAdapter.syscfg.js

  • +1
    TI__Mastermind 20222 points

    Hi Mike,

    There is no support for execution analysis on TIRTOS7.  

    It seems that there is support for execution analysis on TIRTOS6.

    Here I built a project from an old SDK where TIRTOS6 was supported. I happened to have SDK 5_20. So I tried with that.

    These projects have SysConfig and TIRTOS6(tirtos_builds_cc13x2_cc26x2_debug_ccs). But you cannot configure TIRTOS with SysConfig. 

    RTOS configurability in Sysconfig was introduced for TIRTOS7.

    Moving forward there is no plan of supporting the execution analysis graph on TIRTOS7.

    Hope this helps. 

    Regards,
    Sid 

  • 0 in reply to Sid
    Intellectual 270 points

    ooof thats a bummer. Thanks for clarifying tho.