This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC1310: Setting problem of CC1310 TX using PA SKY66115 parameter and CC1310 RX

Part Number: CC1310
Other Parts Discussed in Thread: CC1190


Q1 .CC1310 TX using PA SKY66115   reference swra528.pdf 

in 2.4.2  txpower 0x1CC7  , SmartRF Studio 7 no  0x1CC7 

the 0x1CC7 =6dbm ,so here comes the question  SmartRF Studio 7  txpower  0x24C4 =6dbm ? demo  TX CC1310+SKY66115  ,RX  CC1310 conventional design

.Is this feasible?

Q3.reference swra528.pdf   ,CC1310 Rx mode  What is the hardware design lik

  • Whether there is a reference design