SMARTRFTM-STUDIO: How to set up open channels.

Kengo.Y

Tool/software:

Hi team,

I'd like to set up the open channels.
So I using RF_Get RSSI.
Is that a correct?
And do you have any application manuals for it?

BR,
Kengo.

5 months ago

0 RGW 5 months ago

TI__Mastermind 32180 points

Hi,

There is a help guide and tutorial to SmartRF studio here: https://www.ti.com/lit/swru194

Best regards,

Richard

0 Kengo.Y 5 months ago in reply to RGW

Guru 10800 points

Hi Richard,

Yes, also I knew it.
I think there is not any "OPEN channel" information here, where should I refer to?
Any other resources you can refer me to?

BR,
Kengo.

0 RGW 5 months ago in reply to Kengo.Y

TI__Mastermind 32180 points

Hi Kengo,

By OPEN channels, do you mean channels that has the lowest noise/activity on them in the 429 MHz band or the exact frequency band that can be used ?

0 Kengo.Y 4 months ago in reply to RGW

Guru 10800 points

Hi　RGW,

I'm sorry for my lack of explanation.
Yes, I want to say the exact frequency band that can be used.
So, do you have some manual for searching free band?

BR,
Kengo.

0 RGW 4 months ago in reply to Kengo.Y

TI__Mastermind 32180 points

Hi,

Recommend to use several channels in the 429 MHz band and then monitor each channel for noise or other activity before sending data on that particular channel.

Sub-1 GHz

Sub-1 GHz forum

SMARTRFTM-STUDIO: How to set up open channels.