• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 55 subscribers
  • Views 1117 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC1312R: Can the UART0 RX/TX pin define of serial bootloader be changed?

Vince Wu
Intellectual 320 points
Part Number: CC1312R


Hi TI,

We want to use TI serial bootloader as firmware upgrade mechanism via serial interface.

However, the PIN define of our module is not the same as CC1312 launchpad.

Can the UART0 RX/TX pin define of serial bootloader be changed? 

Best regards,

Vince