CC1310: Overrirde for FEC (R=1/2, K=4) with the DSSS disabled

brinix

Part Number: CC1310
Other Parts Discussed in Thread: CC1101

Hello,

I would like to send data at an on-air symbol rate of 50 Kbaud while using FEC (R=1/2, K=4) with the DSSS disabled. Could someone provide me with the right override to use for this setting?

Also, in an old post, I saw TA12012 mentioning that the FEC is enabled by default. What does that mean?

Thank you,

Brinix

over 6 years ago

0 TER over 6 years ago

TI__Guru**** 317180 points

From your question I get the understanding that you are interested in using FEC but not DSSS. If that is the case, why not use the FEC patch as described here:
dev.ti.com/.../cc1101-migration.html

0 brinix over 6 years ago in reply to TER

Intellectual 440 points

Hello TER,

That should work, thank you!

I need to do the steps mentioned in section 18.1 on the TX and RX right? And, is this FEC (R=1/2, K=4)?

One last thing, this should work on CC1310 right?

Thanks,

Brinix

0 TER over 6 years ago in reply to brinix

TI__Guru**** 317180 points

The settings the link I sent refer to CC1310. And yes, you have to do the steps covered.

This is the FEC compatible with CC1101, the implementation details could be found here: www.ti.com/.../swra113a.pdf

Sub-1 GHz

Sub-1 GHz forum

CC1310: Overrirde for FEC (R=1/2, K=4) with the DSSS disabled