• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 54 subscribers
  • Views 200 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC1150: CC1150 unmodulated carrier

Niels Aakvaag
Prodigy 80 points
Part Number: CC1150

Is there any way of configuring the cc1150 to transmit unmodulated carrier?

  • 0
    TI__Mastermind 39860 points
    Niels,

    Use SmartRF Studio. Select Continuous TX and then Unmodulated. Next, use the register export function (top right corner). The chip will be set up with OOK modulation and logic '0' and logic '1' will have the same power level set in PATABLE0 and PA_TABLE1 respectively.

    BR,
    Sverre