• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 281 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC1310: CC1310 SmartRF control issue

Henry Cheng2
Prodigy 100 points
Part Number: CC1310


Hi TI,

Due to i try to use the XDS110 launch pad to connect with DUT by JTAG interface and there is an message of device is locked, could you help to solve this issue?

Thanks !

Henry Cheng ~

  • 0
    TI__Guru**** 317180 points
    Open Flash Programmer 2, go to the wrench icon in the upper right corner and select mass erase and try again.

    Did you test with a LP connecting to the DUT in addition to the debugger you test with in your previous post?