Sub-1 GHz

Sub-1 GHz forum

State Resolved
Locked Locked
Replies 7 replies
Subscribers 53 subscribers
Views 209 views
Users 0 members are here

Support feedback

Options

Options

Similar topics

CCS/CC1200DK: CC1200DK

Saber Kazeminasab

Expert 1080 points

Part Number: CC1200DK

Tool/software: Code Composer Studio

Hello

I have a CC1200DK. I want to run it with SmartRF studio 7, but the software(smartRF studio 7) doesn't recognize my board. I am working with Windows 10 and installed Cebal controller devices. Can you please guide me how to solve the issue? Thanks in advance!

Saber

over 4 years ago

0 TER over 4 years ago

TI__Guru**** 317180 points

When you open SmartRF Studio, does that mean you get nothing shown in the connected device list? If that is the case, could you take a picture of your board to show how you have placed jumpers etc.

0 Saber Kazeminasab over 4 years ago in reply to TER

Expert 1080 points

Thanks for your reply. Yes that the case. Please kindly find the attached photos. Thanks very much.

Saber

0 TER over 4 years ago in reply to Saber Kazeminasab

TI__Guru**** 317180 points

Have you tried the SmartRF position on this switch:

0 Saber Kazeminasab over 4 years ago in reply to TER

Expert 1080 points

Yes but it didn't work.

0 Saber Kazeminasab over 4 years ago in reply to TER

Expert 1080 points

Do I need to connect the board with msp430 debugger to the PC or I can directly connect them (TrxEBs) to the PC?
Thanks
Saber

0 TER over 4 years ago in reply to Saber Kazeminasab

TI__Guru**** 317180 points

You only have to connect it with a USB cable. See www.farnell.com/.../1725307.pdf and www.ti.com/.../swru294a.pdf

0 Saber Kazeminasab over 4 years ago in reply to TER

Expert 1080 points

Thanks a lot TER!