This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RTOS/SMARTRFTM-STUDIO: SmartRF Studio 2.13.1 has not code template for TI-RTOS

Other Parts Discussed in Thread: CC1310

Tool/software: TI-RTOS

Previous version of SmartRF Studio 2.13.0 has template for TI-RTOS, but current version has not this template. Why?

I use cc1310 with settings:

// Parameter summary

// RX Address0: 0xAA

// RX Address1: 0xBB

// RX Address Mode: No address check

// Frequency: 868.72800 MHz

// Data Format: Serial mode disable

// Deviation: 5.000 kHz

// Fixed Packet Length: 20

// Packet Length Config: Fixed

// Max Packet Length: 115

// Packet Data: 255

// RX Filter BW: 59 kHz

// Symbol Rate: 2.00043 kBaud

// Sync Word Length: 32 Bits

// TX Power: 14 dBm (requires define CCFG_FORCE_VDDR_HH = 1 in ccfg.c, see CC13xx/CC26xx Technical Reference Manual)

// Whitening: IEEE 802.15.4g compatible whitener and 32-bit CRC