CC110L: Crystal for 868 MHz and 920 Mhz

Isee

Part Number: CC110L
Other Parts Discussed in Thread: CC1101

Hi Team,

what would be recommended value for the crystal if customer wants to use the same hardware for 868MHz and 920MHz applications? Would you advise to do that? Any other recommendations your can give?

Thank you!

Regards

Andreas

over 4 years ago

0 TER over 4 years ago

TI__Guru**** 317180 points

See this post for a suggested xtal: https://e2e.ti.com/support/wireless-connectivity/other-wireless/f/667/t/303043

0 Isee over 4 years ago in reply to TER

TI__Expert 4850 points

That post didn`t really suggest a specific XTAL - can you recommend a specific one for 868 and 920 Mhz applications? Also, can you recommend any document to get started with the design besides the one on the CC110L product landing page? Thank you, Andreas

0 TER over 4 years ago in reply to Isee

TI__Guru**** 317180 points

It suggest a xtal frequency, we don't have a specific recommendation for a specific xtal with this frequency.

You can also look at the documents on the CC1101 landing page since CC110L is a sub set of CC1101. What exactly are you looking for?

Sub-1 GHz

Sub-1 GHz forum

CC110L: Crystal for 868 MHz and 920 Mhz