• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 54 subscribers
  • Views 176 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-CC1350-4: CC1350 power line do not low down after remove battery ????

Minh Tran35
Intellectual 570 points
Part Number: LAUNCHXL-CC1350-4
Other Parts Discussed in Thread: CC1350

Hi, experts !

I used LAUNCHXL-CC1350-4 reference design files to make my own board. But now i have a problem with my board.

The problem is after i remove the battery, power line that is used to power up the cc1350 chip do not low down if TX, RX

lines are connecting to another device. What is my problem?