CC1352P: Which software can I use to download program via serial bootloader?

Kamlesh Parihar

Part Number: CC1352P
Other Parts Discussed in Thread: UNIFLASH

I need to download program via serial bootloader to cc1352. I saw some post on ti where they are suggesting to use uniflash tool but in that tool I am able to download the program but it is not working.

So am I doing anything wrong in uniflash tool?

Is there any other tool apart from uniflash?

over 3 years ago

0 Kamlesh Parihar over 3 years ago

Prodigy 250 points

Hello Forum,

I am just able to do programming via smart RF flash programmer tool. To download via serial bootloader I have done below steps:

1. Select Application/User Uart option from connected device.

2. In this option I am getting unknown device that I have to change it manually to my target device.

3. Click download and its done.

So my question is am I doing it in right approach? If there is any setting let me know.

0 YiKai Chen over 3 years ago

Guru 735455 points

Try to refer to sunmaysky.blogspot.com/.../how-to-use-serial-bootloader-mode-to.html

0 Elin W over 3 years ago

TI__Genius 14845 points

Hi Kamlesh,

Which version of Uniflash are you using? Serial Bootloader support was added in Uniflash in version 5.0.0, so make sure that you are using a version of Uniflash that has support for Serial Bootloader Programming.

If that still doesn't work, you can use Flash Programmer 2.

To learn more about the serial bootloader, refer to the Serial Bootloader Interface application note.

Thanks,
Elin

0 Kamlesh Parihar over 3 years ago in reply to Elin W

Prodigy 250 points

Hi Elin,

I am able to program via RF flash programmer tool. But I need to verify the steps.

1. Select Application/User Uart option from connected device.

2. In this option I am getting unknown device that I have to change it manually to my target device.

3. Click download and its done.

So my question is am I doing it in right approach? If there is any setting let me know.

Thanks,

Kamlesh

0 Elin W over 3 years ago in reply to Kamlesh Parihar

TI__Genius 14845 points

Hi Kamlesh,

Yes, this is the right approach but you also have to verify that programming is successful.

Thanks,
Elin

Sub-1 GHz

Sub-1 GHz forum

CC1352P: Which software can I use to download program via serial bootloader?