CC-ANTENNA-DK2: HFSS simulates Board#11, not showing Multi-Band (868MHz/2.4GHz)

Pengcheng Liu

Part Number: CC-ANTENNA-DK2

Hi TI experts,

I did a simulation of Board#11 using HFSS (according to the DXF found from https://e2e.ti.com/support/wireless-connectivity/bluetooth/f/bluetooth-forum/630896/cc-antenna-dk-rd-2-4-ghz-pcb-antenna-design-files), but S11 shows only 2.4GHz but poor at 868MHz. Can anyone kindly help to check where is the problem please? (the HFSS file: DK2.aedt)

Thank you very much in advance,

over 3 years ago

+1 RGW over 3 years ago

TI__Mastermind 30990 points

Hi,

Agree that your simulations are correct that this should have a natural resonance at just 2.4 GHz.

If this antenna needs to work at both 868 MHz and 2.4 GHz, then this is done with the antenna matching network. With no antenna match, then there is just one natural resonance at 2.4 GHz.

Regards,

Richard

0 Pengcheng Liu over 3 years ago in reply to RGW

Intellectual 590 points

Hey Richard, Thank you very much.

Sub-1 GHz

Sub-1 GHz forum

CC-ANTENNA-DK2: HFSS simulates Board#11, not showing Multi-Band (868MHz/2.4GHz)