cc1310, smartrf,fec,modulation

Luis Broska

Other Parts Discussed in Thread: CC1310

I would like to know how to configure the "CMD_PROP_RADIO_DIV_SETUP" for modulation fsk and how can I choose the type of "fec" that I will use.

over 9 years ago

0 Richard W. over 9 years ago

TI__Genius 14860 points

Hi Luis,

please provide some more details about the settings you want to achieve. What do you mean by "FEC"? In the CMD_PROP_RADIO_DIV_SETUP command, FEC is a unfortunately a misnomer, since it enables manchester encoding and not forward-error-correction.

Have you tested our examples? Have you tried to send/receive packets using Smart RF Studio? Our default PHY settings use a binary gaussian FSK modulation format. Is this not what you want?

0 Luis Broska over 9 years ago in reply to Richard W.

Prodigy 30 points

I am doing a job and in it I need to configure the modulation for msk and I need to activate the error corrector code using smartrf studio 7, for the cc1310 radio. I'd like to know how I do it.

0 Siri over 9 years ago in reply to Luis Broska

TI__Guru* 87911 points

For MSK, please see:
e2e.ti.com/.../547536
regarding FEC, please see:
e2e.ti.com/.../534212

Siri

Sub-1 GHz

Sub-1 GHz forum

cc1310, smartrf,fec,modulation