CC1310: CC1310 Tx-Rx turnaround time.

Kummi

Part Number: CC1310

Hi,

Is there is any details about the turnaround time required for CC1310 Tx to Rx or Rx to Tx?
We would like to know if it is required to add delay in between Tx or Rx operations?
Is it ok to start Tx immediately after Rx and vice versa?

Best Regards
kummi

over 7 years ago

0 Siri over 7 years ago

TI__Guru* 79441 points

Hi Kummi

You do not need to insert any delays in your SW but you need to make sure that the RX commands is done before entering TX, and vice versa.
The fastes way to change between RX and TX is by using command chaining. I have done some tests doing this. The measurements were done with tirtos_cc13xx_cc26xx_2_21_00_06 and the standard 50 kbps settings from SmartRF Studio (2.4.3).

TX - RX: 270 us