RTOS/LAUNCHXL-CC1310: CC1310 , Transmit and receive to RF from spi or uart

yaniv maor

Part Number: LAUNCHXL-CC1310
Other Parts Discussed in Thread: CC1310

Tool/software: TI-RTOS

Hello ,

we need please CC1310 , Transmit and receive to RF from uart , that we connect RX and Tx to Pc terminal and send to other cc1310 via RF cons nection .

thank , yaniv

over 8 years ago

0 Richard W. over 8 years ago

TI__Genius 14860 points

Hi,

we don't have an out-of-the-box example. But I suggest to start with one of the EasyLink examples and try to integrate the uartEcho example.

0 TER over 8 years ago in reply to Richard W.

TI__Guru**** 317180 points

RF_UART.zipI made a simple example based on the rfPacketRx/Tx examples.

For RX, it's two versions:

- Use semaphore: The drawback with this is that RX and UART uses the same buffer. Some care has to be taken to avoid UART blocking RX in a final solution.

- Use mailbox. The drawback is the allocation of memory for the mailbox.

Sub-1 GHz

Sub-1 GHz forum

RTOS/LAUNCHXL-CC1310: CC1310 , Transmit and receive to RF from spi or uart