CC1310: How to configure the PHY ID for the project aims to the global marketing

Ricardo Arjona

Part Number: CC1310

Dear All,

I want to change the PHY ID of the sensor at runtime, let's say from 50kbps to 5kbps. Could you please indicate me what are the necessary steps to do this with the sensor code?

I will appreciate your help.

Thanks.

over 6 years ago

0 Severin Suveren over 6 years ago

TI__Mastermind 23730 points

Hi Ricardo,

Are you talking about TI 15.4-stack?

0 Ricardo Arjona over 6 years ago in reply to Severin Suveren

Prodigy 110 points

Hi Edvard!

Thanks for your response.

Yes, I want to do it with the TI 15.4-stack at runtime.

0 Severin Suveren over 6 years ago in reply to Ricardo Arjona

TI__Mastermind 23730 points

You can find an overview of all available PHYs for TI 15.4-stack here: dev.ti.com/.../ti154stack-overview.html

As said in the section, you must update the ApiMac_attribute_phyCurrentDescriptorId PIB attribute.

Sub-1 GHz

Sub-1 GHz forum

CC1310: How to configure the PHY ID for the project aims to the global marketing