RTOS/SENSOR-CONTROLLER-STUDIO: Getting fatal error while executing the SCS.

Himanshu Gupta25

Intellectual 435 points

Part Number: SENSOR-CONTROLLER-STUDIO

Tool/software: TI-RTOS

Hi,

Actually i was try to run the sensor controller studio but getting given below error on startup:

Can anyone help me to resolve this issue.

over 5 years ago

0 Himanshu Gupta25 over 5 years ago

Intellectual 435 points

I am using window 10 64bit with 4GB RAM.

0 Marie H over 5 years ago

TI__Guru 73461 points

Hi Himanshu,

Can you install Sensor Controller Studio in the recommended directory? (C:/ti/)

0 Himanshu Gupta25 over 5 years ago in reply to Marie H

Intellectual 435 points

i tried but still same error

0 TER over 5 years ago in reply to Himanshu Gupta25

TI__Guru**** 317180 points

Do you have admin rights on your PC/ do you have write rights for the directories you get an error message on?

0 Himanshu Gupta25 over 5 years ago in reply to TER

Intellectual 435 points

Yes i verified also for reference you can check pic below:

0 Marie H over 5 years ago in reply to Himanshu Gupta25

TI__Guru 73461 points

Hi Himanshu,

Can you try relocating the user directories? Add the following settings in the Windows registry:

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Software\Texas Instruments\Sensor Controller Studio\Preferences]
"DirUserExamples"="C:/ti/scs_user_dir/examples"
"DirUserProjects"="C:/ti/scs_user_dir/projects"
"DirUserBoardDefs"="C:/ti/scs_user_dir/board_defs"
"DirUserResourceDefs"="C:/ti/scs_user_dir/resource_defs"
"DirUserProcDefs"="C:/ti/scs_user_dir/proc_defs"
"DirUserOsalDefs"="C:/ti/scs_user_dir/osal_defs"
"DirUserLogs"="C:/ti/scs_user_dir/logs"

You can do this easily by saving the attached file as "scs_relocate_user_dirs.reg" (that is, without ".txt"), and then double-click on it in Windows Explorer.

Sub-1 GHz

Sub-1 GHz forum

RTOS/SENSOR-CONTROLLER-STUDIO: Getting fatal error while executing the SCS.