RTOS/CC1352P: i2c slave mode

sivan_toledo

Part Number: CC1352P

Tool/software: TI-RTOS

As far as I can tell the i2c driver in the SDK only supports master mode but the hardware does support slave mode. Are there any examples that show how to use slave mode on the cc1352 in TI-RTOS?

Thanks, Sivan Toledo

over 7 years ago

0 Sai Reddy over 7 years ago

TI__Mastermind 22640 points

Hello Sivan,

According to the I2C TI-Driver documentation, this driver will only support I2C master operation. I will find out what the recommended approach is to use I2C slave on CC1352.

Thanks,

Sai

0 sivan_toledo over 7 years ago in reply to Sai Reddy

Expert 1555 points

Thanks Sai, waiting for your answer.

0 FI over 7 years ago in reply to sivan_toledo

TI__Mastermind 21630 points

Hi,

See if links in this thread help.

https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz/f/156/t/574488

Regards,

0 sivan_toledo over 7 years ago in reply to FI

Expert 1555 points

Thanks a lot. That thread points to another thread and that one has code that seems useful. I'll give it a try. Regards, Sivan

Sub-1 GHz

Sub-1 GHz forum

RTOS/CC1352P: i2c slave mode