CC1352P: ADS-B Receiver 978MHz and 1090MHz

Ziquan Wang

Part Number: CC1352P

Hi Everyone,

I am new to the RF area and trying to select a RF receiver IC for my ADS-B data receiver project.

www.radartutorial.eu/.../sr24.en.html

The RF carrier signal is either 978MHz and 1090MHz. I know it is not what this chip originally intended for. But I saw on 5.9 RF Frequency Bands chapter on datasheet. It seems like those frequency are in the range.

That kind gives me hope this IC might work.

For the RF physical signal. it is just amplitude modulation. When carrier signal is present it is '1' and when it is not it is '0'. the data rate is 1MBit/s

"A dedicated Radio Controller (Arm® Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM thus ensuring ultra-low power and great flexibility." The quote from datasheet implies it can be programmed to support this protocol.

I hope you can answer me whether this IC will be suitable for my application.

Thanks,

Ziquan

over 6 years ago

0 TER over 6 years ago

TI__Guru**** 317180 points

See https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz/f/156/t/792803

0 Ziquan Wang over 6 years ago in reply to TER

Prodigy 40 points

Hi TER,

Thanks for the reply. From reading the link you mentioned "If this is a potentially large opportunity, contact TI sales to potentially get this on the "to do" list.".

What do you consider it is large opportunity?

I work for a company who manufacture ADS-B receiver and collect airplane activity data.

If this Chip can receive and demodulate ADS-B Mode S, it would help us alot.

Do you have a regional sales manager I can talk to?

Thanks

0 TER over 6 years ago in reply to Ziquan Wang

TI__Guru**** 317180 points

"large opportunity" is a bit dependent on the work required to implement the wanted feature and has to be evaluated case by case. But I would say > 500 k give or take.

I looked at the web site for the company your account has listed. Which office do you belong to/ which part of the US should a sales rep cove, this way I can try to get in touch with the relevant person.

0 Ziquan Wang over 6 years ago in reply to TER

Prodigy 40 points

We are located in Houston, TX.

0 TER over 6 years ago in reply to Ziquan Wang

TI__Guru**** 317180 points

I talked to my superior and he said that we are not going to do any work on ADS-B receiver implementation.

0 Ziquan Wang over 6 years ago in reply to TER

Prodigy 40 points

Thanks for asking. I appreciate your effort.

We will look for solutions somewhere else.

Sub-1 GHz

Sub-1 GHz forum

CC1352P: ADS-B Receiver 978MHz and 1090MHz