This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: LAUNCHXL-CC1352P
I'm trying to connect a LAUNCHXL_CC1352P1 board (HW Rev A) to SmartRF Studio 7 ver 2.8.0 over USB. SmartRF Studio detects the XDS110 debug probe properly, but fails to connect to the device, giving the error message I've posted below. I am able to flash and debug (use step, breakpoints, etc) this board over USB using CCS ver 8.3.00009. The jumpers are in the default position, do they need to be changed? Also, I've made sure that CCS is closed when I try to open SmartRF Studio.
You are using a very old version of SmartRF Studio. Can you try updating to the latest version.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
Note that the latest Studio version is 2.15 meaning that you should upgrade to get the latest settings etc. The newest SDK also requires CCS 9.2
Could you test with the newest Studio to see if that makes a difference? Also, which version of CC1352P do you have (see if you can read it using Flash Programmer 2 if you still have issues with Studio). If you don't have rev E, please get a new launchpad.
In reply to TER:
It works now. Updated to SmartRF Studio ver 2.15.0. I was using a launchpad with Rev C. CC1352P chip, which still failed with version 2.15.0 of SmartRF Studio. I switched to a launchpad with Rev E. chip and it works fine.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.