This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
As you can see from the screen cut, I use GPTIMER0A to set a 1ms interrupt and in the ISR, I reverse the signal of DIO6. But when I use oscilloscope to check its precision, I find there is a 5us error which is large to me. And the as for a 20ms signal, there is a 150us error. The TIMER's clock is 48MHZ
So I want to ask what is the precision of the TIMER when it run in high frequency.
Wish you best.
Apologies for the late reply. Accuracy of the clock goes back to the source of the clock signal, the oscillator. For example, the crystals on the CC1310 LaunchPad have frequency tolerances that range from ±20 to ±50ppm. For microsecond accuracy, you'd need to use an OCXO, rubidium oscillator, or cesium oscillators that have frequency tolerances that range from ±0.001 to ±0.0000001 ppm.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.