CC1310: Can CC1310 work at low power consumption mode with 12.8k ADC sampling frequency and 12-bit?

Yuan Tan63

Part Number: CC1310

Hi,

The issue is described as title.

And could you please tell me how to let timer work at lower consumption. customer's test result is 845uA. they want to know how to decrease that.

Thank you!

Yuan

0 Clément over 6 years ago

Hi,

Power consumption can be largely decreased using the Sensor Controller. Have they considered this option?

I hope this will help,

Best regards,

0 user6056718 over 6 years ago in reply to Clément

How to use the Sensor Controller, is there a method in the SDK

0 Clément over 6 years ago in reply to user6056718

Hi,

Please have a look to the SimpleLink Academy labs related to Sensor Controller.

Regards,

0 user6056718 over 6 years ago in reply to Clément

May I ask if the ADC in Sensor Controller mode can adjust the frequency and ensure the real-time performance of ADC data?

0 TER over 6 years ago in reply to user6056718

It's possible to set up the ADC in the same way both from the CM3 and the Sensor Controller.

0 user6056718 over 6 years ago in reply to TER

Isn't the sensor controller mode different from the CM3 control ADC method?Is there any relevant introduction

0 Clément over 6 years ago in reply to user6056718

Hi,

Please have a look to the labs provided in the SimpleLink Academy. A module is dedicated to Sensor Controller Studio.

Regards,

Sub-1 GHz forum