This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SIMPLELINK-CC13X2-26X2-SDK: simplelink_cc13x2_26x2_sdk_4_10_00_78

Prodigy 100 points

Replies: 1

Views: 80

Part Number: SIMPLELINK-CC13X2-26X2-SDK

When I use IAR to open the SDK project, I get the following error. IAR embedded workbench 8.32, 8.42 and 8.50 all have the same error report. The SDK version is simplelink_ cc13x2_ 26x2_ sdk_ 4_ 10_ 00_ 78 and simplelink_ cc13x2_ 26x2_ sdk_ 3_ 40_ 00_ 02. Previous versions of SDK do not report errors.

 

Building configuration: i2secho_CC1312R1_LAUNCHXL_tirtos_iar - Debug
Updating build tree...
Performing Pre-Build Action
Performing Custom Build : i2secho.syscfg
Error while running c:/ti/sysconfig_1.4.0/sysconfig_cli.bat -o D:\Program Data\IAR_8_32\i2s\2 -s "c:/ti/simplelink_cc13x2_26x2_sdk_4_10_00_78/.metadata/product.json" --compiler iar D:\Program Data\IAR_8_32\i2s\2\i2secho.syscfg

Total number of errors: 1
Total number of warnings: 0

 

1 Reply

  • Hi,

    Can you verify you have properly set-up SysConfig and your IAR project using this link.

    Best regards,

    - Clément

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.