CCS/CC1310: EnergyTrace incorrect start

Savva Nazarov

Part Number: CC1310
Other Parts Discussed in Thread: ENERGYTRACE

Tool/software: Code Composer Studio

Hello!

I am developing my board on c1310 and use Code Composer Studio Version: 9.1.0.00010.

For debugging, I use XDS110 Debug Probe, with XDS110 Add-on energy trace hdr. Since I am doing low power board, for analysis i use EnergyTrace. But I was forced to reinstall the studio...

After reinstalling the studio, EnergyTrace started only with debug. Start measurement is not possible(picture below). Another point is that before I could run measurements, without starting a program.
Please help me understand what I'm doing wrong?

over 3 years ago

0 YiKai Chen over 3 years ago

Guru 735455 points

Do you click energy trace button to start it in CCS?

0 Savva Nazarov over 3 years ago in reply to YiKai Chen

Prodigy 100 points

YiKai Chen thanks for the answer!
Yes, I clicked on this button. CCS starts launch EnergyTrace, but after progress bar is full - nothing happens. EnergyTrace now runs only in debug mode, and I can’t start measuring.(This is displayed on the image in the post.)

I assume that for some reason EnergyTrace does not start correctly.
Maybe settings? Maybe interaction with CCS?

0 YiKai Chen over 3 years ago in reply to Savva Nazarov

Guru 735455 points

I see you are using CCS9.1. I would suggest you to use CCS10.1 which works in my desktop.

0 Savva Nazarov over 3 years ago in reply to YiKai Chen

Prodigy 100 points

I updated the studio to v. 10.1.0.00010. Now I have problems compiling my project, but EnergyTrace now works.

Sub-1 GHz

Sub-1 GHz forum

CCS/CC1310: EnergyTrace incorrect start