CCS/LAUNCHXL-CC1352R1: Execution Graph not working

Jones_S

Tool/software: Code Composer Studio

Hey,

my Execution Graph is not showing Data.

In my RTOS Object View under LoggerStopMode there is also no data, which leads me to a wrong configuration of *.cfg,

In my .cfg I changed everything as described in http://dev.ti.com/tirex/explore/content/simplelink_academy_cc13x2_26x2sdk_4_20_03_00/modules/rtos/tirtos_basics/tirtos_basics.html#task-2-debugging-tools

Any ideas what i configured wrong ?

over 5 years ago

0 Jenny T over 5 years ago

TI__Expert 4435 points

Hi Jones_S,

I will assign an expert to help you with this issue you are seeing.

Best Regards,

Jenny

0 desouza over 5 years ago

TI__Guru**** 171729 points

Hi,

Interesting; from the snippet of code above I see the BIOS in ROM is still enabled, where the reference (and the .cfg file) says you must disable it to enable the system logs. Did you disable it to see if the LoggerStopMode starts working?

Hope this helps,

Rafael

Sub-1 GHz

Sub-1 GHz forum

CCS/LAUNCHXL-CC1352R1: Execution Graph not working