This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: CC1310
Normally, I use the SmartRF Flash programmer 2 and CC1350 Launchpad for flash firmware one by one which was slow.
I want to do mass production using cc1310 ICs. Please advise me about HW/SW tools to Flash Firmware .bin to a lot of ICs?
Try to refer to discussions in this thread.
If my post answers your question, please click on "This Resolved my issue" button to benefit others who have the same issue.
Comparision on Zigbee, Z-Wave, and Z-Wave Long range.
Build OpenThread Sleepy End Device doorlock prototype to test with Rasperry Pi OpenThread Border Router
How to use two UARTs in CC26x2 and CC13x2
SwitchBot DIY using LPSTK-CC1352R , SG90 servo motor, and ProjectZero to away from COVID-19.
How to use two endpoints in SIMPLELINK-CC13X2-26X2-SDK Z-Stack.
How to create a periodic event to toggle BLE Advertising in CC26xx simple_peripheral example
How to use indication in simple_peripheral example and use Btool to enable indication
How to detect button hold in CC26x2, CC13x0, CC13x2 SDK.
660 Zigbee devices in the same Zigbee network!
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to YiKai Chen:
Or on this page:
Note that the list I link to also contain programmers for MSP, please check that the programmers you look at cover the MCU you are interested in.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.