Part Number: CC2340R2 Other Parts Discussed in Thread: CC2340R5 Tool/software: Hello! In order to migrate a project developed for CC2340R5 to CC2340R21 or from CC2340R5 to CC2340R22, please follow CC2340R5 to CC2340R21 Porting Guide and CC2340R5…

The new SimpleLink Academy TI Wi-SUN FAN Linux Host Wfantund guides you through the network set-up using wfantund from the terminal and using the Wi-SUN WebApp. It introduces network testing methods using ping and iPerf. Finally, it teaches you how to…

Part Number: CC2340R5 Dear users, IAR Embedded Workbench users are recommend to use IAR 9.40.2 with F3 SDK 7.40.00.64. This information has not been properly reported in the release notes of the SDK. Using previous IAR versions may lead to issue…

Part Number: CC1352P7 Other Parts Discussed in Thread: CCSTUDIO , , SYSCONFIG All, Let this serve as a guide for getting Amazon Sidewalk SID demo up and running on the CC1352P7-1 Launchpad. Took me around 12 hours to get where I am comfortable building…

Part Number: CC2340R5 The purpose of these instructions are to detail how to merge/add multiple BLE profiles into a single project. The following is an example which uses the " data_stream_UART_over_BLE" as the base project and the "basic_ble_profiles…

Part Number: SENSOR-CONTROLLER-STUDIO Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source…

Part Number: WL1837MOD This new release includes firmware, driver, wpa_supplicant and hostapd updates. The links to the repository of each component is as follows: WL18xx firmware repo: https://git.ti.com/cgit/wilink8-wlan/wl18xx_fw/ --> master…

This guide shows how to use SDK Composer so the size of the SDK downloaded and installed is reduced. This guide applies to the devices supported by the SimpleLink Low Power F2 SDK (CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4) and SimpleLink Low…

Part Number: LP-EM-CC2340R5 Other Parts Discussed in Thread: CC2340R5 The following details how to modify the uart2echo SDK example to enable the event Mask, and event Callback overrun on the LP-EM-CC2340R5. Summary: By implementing the following…

Part Number: CC1312R7 Other Parts Discussed in Thread: SYSCONFIG , , UNIFLASH Recently I had to go through a hard process of searching and trying to make first a different size program, then add serial tracing and last be able to encrypt it. The idea…