CC3200STK-WIFIMK: CC3200 sensortag not working after reset

Isuru Wijesundara

Part Number: CC3200STK-WIFIMK
Other Parts Discussed in Thread: CC3200, CC3220S-LAUNCHXL

I got new cc3200 sensortag and because of a wrong network config i have reset the deice.Now the accesspoint is not showing.what happening here.how can I fix this?If it can not be fix can I get a replacement.I just got it today.....

over 2 years ago

0 Seong Kim over 2 years ago

TI__Mastermind 34880 points

Hi Isuru,

Have you tried to factory reset the device? This can be done by holding down both buttons for 6 seconds as indicated in the User's Guide, but I would recommend trying again this time holding the two buttons down for a longer period of time just in case.

There is not a way to reprogram the sensortag. You can try reaching out to the distributor that you purchased the sensortag from to find options for returning it if needed.

If you are intending to do development with the CC3200 or CC3220, the development platform is the LaunchPad. A good starting point for a similar demo with the LaunchPad is to use the CC3220S-LAUNCHXL, BOOSTXL-SENSORS, and download the CC3220 SDK + Sensor and Actuator Plugin.

www.ti.com/.../CC3220S-LAUNCHXL
www.ti.com/.../BOOSTXL-SENSORS
www.ti.com/.../SIMPLELINK-CC3220-SDK
www.ti.com/.../SIMPLELINK-SDK-SENSOR-ACTUATOR-PLUGIN

BR,

Seong

Wi-Fi

Wi-Fi forum

CC3200STK-WIFIMK: CC3200 sensortag not working after reset