This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3120MOD: CC3120 MOD

Part Number: CC3120MOD
Other Parts Discussed in Thread: UNIFLASH, , CC3120

Hello All, 

To connect Wi-Fi module to Uniflash I need only the following pins: TX/ RX/ RST (or nHIB)

The same setup is not working with Radio Tool (I'm using CC3xxx_RadioTool_1.0.3.16). Can you please explain how many pins I need to use in CC3120MOD to connect it to Radio Tool?